"Dryer stops too early when the clothes are still wetChecked humidity sensorIt shows 600-700 kOm when wetI am going to replace humidity sensor Called to tech support, they advised to replace sensor and board ; ordrng 2 D518565 (Moisture sensor bar)s and 1 D518862 (Board)"

Parts replaced Operation checked Dryer is working fine

"Found - compressor is not running Measured inverter board voltage Input is 120V AC, okay Output is 3,7V DCWhen I run test, compressor started, condenser became warm, compressor became warm, temperature in the refrigerator began to dropI suppose the compressor is good, problem is inverter board Reported all to PSG tech line; snapped 5 QuickPics"

"Customer states, that a dryer is not working properly in sensing mode. Called to Speed Queen Techline, he told me to get key probe to measure temperature and manometer to measure airflow and come again for additional tests. Have to reschedule.; snapped 2 QuickPics"

"Replaced Control board Also checked door switches and replaced one door switch which was defective Operation checked, microwave working fine Customer paid ; used 1 WPW10486188 ( Control board), and 1 W10211972 ( Microswitch) from stock"